Additional Information:
Type: Misc

K Span Forming Machine is a new building materials,it can produce various of steel purlin.

How does a roll forming machine work?

A roll forming machine bends metal at room temperature using a number of stations where fixed rollers both guide the metal and make the necessary bends. As the strip of metal travels through the roll forming machine, each set of rollers bend the metal a little more than the previous station of rollers.

This progressive method of bending metal ensures that the correct cross-sectional configuration is achieved, while maintaining the cross-sectional area of the work piece. Typically operating at speeds between 30 to 600 feet per minute, roll forming machines are a good choice for manufacturing large quantities of parts or very long pieces.

What are the characteristics of the Roll Forming Machine?

Roll forming machine adopts a vertical storage board,and can be added at any time without downtime;It is suitable for the same carton size packaging at the same time,if you need to change the carton size,manually adjust the use (the time required is only 1 to 2 minutes);The machine adopts rational design,and the suction box,molding,and back cover are automatically processed at one go;Its mechanical performance is precise and durable,there is no vibration in the operation process,and it has a long service life;It can be used as a stand-alone machine or it can be used with an automated packaging line.

What are the benefits of the roll forming machine?

Forming machine has many advantages,such as easy installation,short building period,light weight but high strength.And at present,it has been widely used as the roof and wall of factory,warehouse,garage,gymnasium,farm,exhibition center,theatre,cinema,etc.

How to maintain the roll forming machine?

1.Before driving, check whether the host is complete,whether it is tighter than the belt and whether the electricity is loose,and whether the electrical grounding is good.

2.Check vibration platform,mold box and slider,whether the connecting bolts of vibrator and indenter beam,feeding setting and main frame are loose;

3.Check each activity part and add lubrication according to lubrication requirements;

4.prohibit the vibrator no-load operation;

5.After the end of each day's work,all parts of the machine should be in the initial state and thoroughly clean all parts of the machine to prevent the concrete from condensing on the machine, but not to clean the machine with water;

6.The vibration device and reducer should be replaced regularly with oil and maintenance.The vibration device must be checked,cleaned and replaced at least once within six months;

7.Electrical control cabinets and electrical control parts should be protected against moisture, sun, and dust;

8.Check the size of the base plate.Unqualified persons are not allowed to use it,so as not to damage the machine due to jamming.

Why Choose for Roll Forming Machine ?

We are Professional

Our professional project engineers to meet your needs

We are Trusted

We have a first-class team in the industry to create quality programs for you.

Certified Products

We have a lot of certification, the quality must be very reliable

Kspan-ubm conduct inspections in every production procedure, and for finished products, we will take 100% inspection depend on international standards according to customerís requirements.